Error code · Wine Cabinet

ASKO Wine Cabinet Code T2: Zone A Temperature Sensor Error

Code T2 on the three-zone ASKO WCN311942G wine cabinet means a temperature sensor error for zone A. The sensor tells the control how warm or cold the air is around the bottles in that zone, and…

Medium · inspection needed

(713) 804-6320

Code: T2
Appliance: Wine Cabinet
Brand: ASKO
Warranty: 30-day workmanship

What T2 means

Code T2 on the three-zone ASKO WCN311942G wine cabinet means a temperature sensor error for zone A. The sensor tells the control how warm or cold the air is around the bottles in that zone, and a pop-up appears on the touch display when the reading cannot be used. Without it, zone A may not hold the temperature you set. If your machine is an ASKO washer or dryer, ignore this page, because the same characters mean something different there.

Common causes of T2

The zone A temperature sensor
The sensor wiring and connector
The control reading the sensor
Frost or moisture sitting on the sensor

✓ One safe check you can try

1. Press X or Confirm and the message goes away for now. 2. Check how zone A feels and what the display shows for its temperature. 3. Keep door openings to a minimum, since the control may be guessing at the zone temperature. 4. When the message reappears 3 hours later, give us a call.

! Why to stop there

A sensor error does not tell us whether the zone is actually too warm or too cold.
We measure the real temperature in zone A and compare it with the sensor.
A written price comes before any work, and each repair is backed by a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wine Cabinet codes

Temperature out of rangeASKO Wine Cabinet Message "Temperature Out of Range": Zone Alarm E0ASKO Wine Cabinet Code E0: Power Board to Display Communication E2ASKO Wine Cabinet Code E2: Wireless Card Communication Error E3ASKO Wine Cabinet Code E3: Wireless Card to Power Board Humidity out of rangeASKO Wine Cabinet Message "Humidity Out of Range": Zone Alarm P1ASKO Wine Cabinet Code P1: Proximity Sensor Error T1ASKO Wine Cabinet Code T1: Room Temperature Sensor Error T3ASKO Wine Cabinet Code T3: Zone A Evaporator Sensor Problem

T2T2 questions

What if zone A feels fine?

The sensor may still be reporting wrongly even if zone A feels fine. We measure the real temperature and test the sensor so the control can manage zone A properly again.

Is T2 the same as the evaporator sensor code?

No. T2 is the sensor in the zone A air itself. T3 is a separate sensor on the zone A evaporator, which is the cold surface that does the cooling.

Should I move my bottles?

Move the bottles only if zone A feels clearly off from your setting. Otherwise leave them where they are, keep the door closed as much as you can, and book a visit.

Book a visit

Still seeing T2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320