Error code · Wine Cabinet

ASKO Wine Cabinet Code T9: Zone C Evaporator Sensor Reading Error

T9 is the temperature sensor error for the zone C evaporator on the ASKO WCN311942G model. The evaporator is the cold surface that chills the air in zone C, and the sensor on it reports how…

Medium · inspection needed

(713) 804-6320

Code: T9
Appliance: Wine Cabinet
Brand: ASKO
Warranty: 30-day workmanship

What T9 means

T9 is the temperature sensor error for the zone C evaporator on the ASKO WCN311942G model. The evaporator is the cold surface that chills the air in zone C, and the sensor on it reports how the cooling is doing. When the reading is unusable, a pop-up appears on the touch display. Zone C may cool unevenly. Only wine cabinet owners need this page, since an ASKO washer or dryer gives these characters a different meaning.

Common causes of T9

The zone C evaporator sensor
Its wiring and connector
Frost at the evaporator
The control reading the sensor

✓ One safe check you can try

1. Touch X or Confirm to put the message away. 2. Make sure the door seals evenly all around. 3. Do not pack zone C so tightly that air cannot move. 4. If the pop-up is back 3 hours later, call us, as the owner's manual advises.

! Why to stop there

The code alone does not say whether the sensor or the frost is the cause.
We test the sensor and the cooling behavior in zone C.
A written price comes before any work, and our work is covered by a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wine Cabinet codes

Temperature out of rangeASKO Wine Cabinet Message "Temperature Out of Range": Zone Alarm E0ASKO Wine Cabinet Code E0: Power Board to Display Communication E2ASKO Wine Cabinet Code E2: Wireless Card Communication Error E3ASKO Wine Cabinet Code E3: Wireless Card to Power Board P1ASKO Wine Cabinet Code P1: Proximity Sensor Error T1ASKO Wine Cabinet Code T1: Room Temperature Sensor Error T2ASKO Wine Cabinet Code T2: Zone A Temperature Sensor Error T3ASKO Wine Cabinet Code T3: Zone A Evaporator Sensor Problem

T9T9 questions

What is T9 compared with T8?

T8 is the sensor in the zone C air. T9 is the sensor on the zone C evaporator, the cold surface that chills that zone, so each code leads to its own checks.

Is the cabinet still cooling?

It usually is, but zone C may not follow its setting as closely as before. Watch the display, note any drift, and tell us what you see when you book the visit.

Do I need to defrost anything?

Please do not chip at ice or use anything sharp inside the cabinet. If you see frost, mention it when you book, and we deal with it safely during the visit.

Book a visit

Still seeing T9?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320