ASKO Wine Cabinet Message “Temperature Out of Range”: Zone Alarm
"Temperature out of range" is a plain-wording alarm on the ASKO WCN311942G wine cabinet rather than a numbered code. You hear an alarm sound and see a pop-up when the temperature in a zone is outside…
- Code
- Temperature out of range
- Appliance
- Wine Cabinet
- Brand
- ASKO
- Warranty
- 30-day workmanship
What Temperature out of range means
"Temperature out of range" is a plain-wording alarm on the ASKO WCN311942G wine cabinet rather than a numbered code. You hear an alarm sound and see a pop-up when the temperature in a zone is outside what it is meant to hold, and that zone temperature blinks on the display until it recovers. The message reports conditions in the zone rather than a stopped part.
Common causes of Temperature out of range
- A door opened often or not closing tightly
- Warm, stuffy air around the cabinet
- A fresh load of bottles, start-up or a big change of setting
- A zone temperature sensor reading wrongly
1. Keep the door shut as much as possible. 2. Give the cabinet a few hours to catch up after a large setting change, a fresh load of bottles or start-up. 3. Check that air can circulate freely around the cabinet. 4. If the alarm persists, call us or use the online form, and we will confirm a three-hour arrival window.
- The alarm alone does not show whether real conditions or a sensor reading are behind it.
- We compare the display with the real temperature and check the door seal and ventilation.
- We write the price down first, and a 30-day workmanship warranty covers the repair.
Other Wine Cabinet codes
Is this the same as a T code?
No. The T codes are sensor errors. This alarm says a zone temperature is outside its target, even when all the sensors are working and reporting correctly.
How long before I worry?
The owner's manual suggests allowing hours after a big setting change or new bottles. If the blinking continues after that, or the alarm keeps coming back, we should look at the cabinet.
Does the blinking stop by itself?
Yes. The blinking zone temperature stops once the zone recovers to its set value. If it never recovers, that is the point to call us and book a visit.
Still seeing Temperature out of range?
A technician diagnoses it on site and gives you the price in writing before any work starts.