ASKO WCAM1812 Washer-Dryer That Fills and Drains Nonstop
The ASKO WCAM1812 combination washer-dryer, an older US model, lists a problem called Washer fills and drains continuously. Water comes in and goes straight back out, so the wash never builds up to the right level.…
- Code
- FILLS AND DRAINS CONTINUOUSLY
- Appliance
- Washer-Dryer
- Brand
- ASKO
- Warranty
- 30-day workmanship
What FILLS AND DRAINS CONTINUOUSLY means
The ASKO WCAM1812 combination washer-dryer, an older US model, lists a problem called Washer fills and drains continuously. Water comes in and goes straight back out, so the wash never builds up to the right level. The owner's manual points to the drain hose: it must be at the correct height, and if it drains into a sink, its outlet must not sit under water.
Common causes of FILLS AND DRAINS CONTINUOUSLY
- A drain hose set lower than the manual allows, so water runs out as it comes in
- A hose end that sits under water in a sink
- A water level or inlet valve problem that we find by testing
1. Check that the drain hose is at the correct height, as shown on pages 4 and 5 of the manual. 2. If the hose drains into a sink, lift the end so it is not under water. 3. Start the wash again and watch whether the water level now builds up. 4. If it still fills and drains, turn the water supply off and schedule service.
- Whether the inlet valve shuts fully
- Whether the level control tells the machine when to stop filling
- Whether the hose and its mounting are still correct once you adjust them
Why does my washer-dryer fill and drain at the same time?
When the drain hose sits too low, or its end is under water, the water can leave as fast as it enters. The manual asks you to check the height first.
How high should the drain hose be?
The owner's manual gives the correct height on pages 4 and 5. Follow that figure and make sure the hose outlet in a sink is above the water.
Can you repair this older combination unit?
Yes. We can take it from here. Schedule service by calling us or filling out the online form, and expect a written price before any tools come out, along with a 30-day workmanship warranty.
Still seeing FILLS AND DRAINS CONTINUOUSLY?
A technician diagnoses it on site and gives you the price in writing before any work starts.