Error code · Washer-Dryer

ASKO Washer-Dryer WCAM1812: Troubleshooting Without Codes

Low risk · DIY check OK

Code: NO ERROR CODES
Appliance: Washer-Dryer
Brand: ASKO
Warranty: 30-day workmanship

What NO ERROR CODES means

The ASKO WCAM1812 combination washer-dryer, an older US model, does not show error codes. Its owner's manual has no code table at all. Troubleshooting is a list of problems, such as a washer that will not drain, with a few checks for each. If your unit stops or acts up, there is no code to look up, so what you see and hear is the clue we work from.

Common causes of NO ERROR CODES

Water trouble such as a drain hose that is bent or set wrong
A door that is not closed or is still locked
An unbalanced load or too much detergent
A part that needs testing, since the machine names none

✓ One safe check you can try

1. Jot down what the machine does and when it happens. 2. Check the drain hose position and look for kinks. 3. Make sure the door is closed and the water supply is open. 4. Try rebalancing the load and using less detergent, then restart. If the behavior repeats, schedule service.

! Why to stop there

What the machine is reacting to, since it prints no code at all
Whether the washing side or the drying side is involved
Whether older parts can still be sourced for this combination unit

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer-Dryer codes

DOES NOT DRAIN AND SPINASKO Washer-Dryer WCAM1812 Stalls Without Draining or Spinning FILLS AND DRAINS CONTINUOUSLYASKO WCAM1812 Washer-Dryer That Fills and Drains Nonstop THE DOOR WILL NOT OPENASKO WCAM1812 Washer-Dryer Door Will Not Open After the Cycle

NO ERROR CODESNO ERROR CODES questions

Does my WCAM1812 have error codes?

No. The owner's manual has no code table, only a list of problems with checks for each one. When the machine acts up, we diagnose from what it does and where in the cycle it happens.

What should I tell you when I call?

Describe what happens and when: during filling, washing, draining, spinning or drying. Those details tell us where to start, and no code lookup is needed.

Do you repair the WCAM1812?

Yes, and we are upfront if a repair does not pay off. Booking is simple: call us, or fill out the online form, and we agree on a three-hour arrival window with you. You will see the price in writing before we begin, and our repairs carry a 30-day workmanship warranty.

Book a visit

Still unsure about NO ERROR CODES?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320