ASKO Wine Cabinet Code T3: Zone A Evaporator Sensor Problem
T3 is the temperature sensor error for the zone A evaporator on the ASKO wine climate cabinet model WCN311942G. The evaporator is the cold surface that chills the air for zone A, and its sensor tells…
- Code
- T3
- Appliance
- Wine Cabinet
- Brand
- ASKO
- Warranty
- 30-day workmanship
What T3 means
T3 is the temperature sensor error for the zone A evaporator on the ASKO wine climate cabinet model WCN311942G. The evaporator is the cold surface that chills the air for zone A, and its sensor tells the control how the cooling is going. When the touch display shows T3, the control cannot use that reading. Zone A may cool unevenly. The same characters point to other things on an ASKO washer or dryer; this page is for the wine cabinet.
Common causes of T3
- The zone A evaporator sensor
- Its wiring and connector
- Frost or ice build-up around the evaporator
- The control reading the sensor
1. Tap X or Confirm to dismiss the message. 2. Check whether the door is closing fully, since air leaks can frost the cooling surface. 3. Avoid blocking the airflow in zone A with tightly packed bottles. 4. As the owner's manual notes, a pop-up that reappears in 3 hours means a visit is due.
- The code does not show whether the sensor or the cooling around it is the issue.
- We test the sensor, look at the cooling behavior in zone A, and check the door seal.
- Price is written first, and the repair comes with a 30-day workmanship warranty.
Other Wine Cabinet codes
What is an evaporator?
It is the cold part of the cooling system inside the cabinet. Air passes over it and carries the cold into the zone, so its sensor matters to zone A.
Can ice cause T3?
Frost on the cooling surface can disturb the sensor reading. We check for it along with the sensor itself, because what we do next depends on what we find at the evaporator.
Does T3 affect zones B and C?
Each zone has its own sensors, so T3 points at zone A only. We still look over the whole cabinet during the visit, since the zones share one cooling system.
Still seeing T3?
A technician diagnoses it on site and gives you the price in writing before any work starts.