Error code · Wine Cabinet

ASKO Wine Cabinet Code T6: Zone B Evaporator Sensor Problem

Medium · inspection needed

Code: T6
Appliance: Wine Cabinet
Brand: ASKO
Warranty: 30-day workmanship

What T6 means

T6 on the three-zone ASKO WCN311942G cabinet reports a temperature sensor error for the zone B evaporator. The evaporator is the cold surface that chills zone B, and its sensor tells the control how the cooling is performing. With the reading unusable, a pop-up appears on the touch display and zone B may cool unevenly. Owners of an ASKO washer or dryer should know these characters mean something else on those machines.

Common causes of T6

The zone B evaporator sensor
Its wiring and connector
Frost around the evaporator
The control reading the sensor

✓ One safe check you can try

1. Begin with X or Confirm, which closes the pop-up. 2. Confirm that the door closes fully and the seal is not folded over. 3. Leave some air space between bottles in that zone. 4. A return of the message after 3 hours is the owner's manual cue to book service.

! Why to stop there

We cannot say from the code whether the sensor, frost or the control is involved.
We test the sensor and see how zone B cools.
A written price comes first, and our work is covered by a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wine Cabinet codes

Temperature out of rangeASKO Wine Cabinet Message "Temperature Out of Range": Zone Alarm E0ASKO Wine Cabinet Code E0: Power Board to Display Communication E2ASKO Wine Cabinet Code E2: Wireless Card Communication Error E3ASKO Wine Cabinet Code E3: Wireless Card to Power Board T8ASKO Wine Cabinet Code T8: Zone C Temperature Sensor Error T9ASKO Wine Cabinet Code T9: Zone C Evaporator Sensor Reading Error U1ASKO Wine Cabinet Code U1: Vibration Sensor Error H4ASKO Wine Cabinet Code H4: Outside Humidity Sensor Error

T6T6 questions

How does T6 differ from T4?

T4 is the sensor in the zone B air. T6 is the sensor on the zone B evaporator, the cold surface that does the cooling, so the two codes point us to different checks.

Can I keep using zone B?

Often yes, with some watching. Check the zone B temperature on the display from time to time, and book a visit if it drifts away from the setting you chose.

Is a leftover pop-up dangerous?

No. It is an information message, not a safety alarm. We still want to find out what triggered it, so the cabinet does not surprise you later.

Book a visit

Still seeing T6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320