Error code · Wine Cabinet

ASKO Wine Cabinet Code T8: Zone C Temperature Sensor Error

Code T8 appears on the ASKO WCN311942G wine cabinet when the temperature sensor for zone C gives a reading the control cannot use. Zone C relies on that sensor to hold the temperature you set, so…

Medium · inspection needed

(713) 804-6320

Code: T8
Appliance: Wine Cabinet
Brand: ASKO
Warranty: 30-day workmanship

What T8 means

Code T8 appears on the ASKO WCN311942G wine cabinet when the temperature sensor for zone C gives a reading the control cannot use. Zone C relies on that sensor to hold the temperature you set, so a pop-up appears on the touch display and the zone may run warmer or colder than intended. An ASKO washer or dryer uses these characters differently, so this page speaks only about the wine cabinet.

Common causes of T8

The zone C temperature sensor
The sensor wiring and connector
The control board input
Moisture on the sensor

✓ One safe check you can try

1. Press X or Confirm to dismiss the message. 2. Compare the zone C temperature shown with how cool the bottles feel. 3. Keep the door closed and avoid big setting changes while you wait. 4. When the pop-up comes back after 3 hours, give us a call.

! Why to stop there

We cannot tell if the zone is really off or only the reading is.
We measure zone C directly and test the sensor and wiring.
You see a written price before we start, and our repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wine Cabinet codes

E0ASKO Wine Cabinet Code E0: Power Board to Display Communication E2ASKO Wine Cabinet Code E2: Wireless Card Communication Error E3ASKO Wine Cabinet Code E3: Wireless Card to Power Board Temperature out of rangeASKO Wine Cabinet Message "Temperature Out of Range": Zone Alarm H4ASKO Wine Cabinet Code H4: Outside Humidity Sensor Error Humidity out of rangeASKO Wine Cabinet Message "Humidity Out of Range": Zone Alarm P1ASKO Wine Cabinet Code P1: Proximity Sensor Error T1ASKO Wine Cabinet Code T1: Room Temperature Sensor Error

T8T8 questions

Is T8 for the top or bottom zone?

T8 is for zone C. Which physical level that is depends on how your cabinet is laid out, but the code always names zone C, so we know which sensor to test.

Do I need to empty zone C?

Not usually. Empty it only if the zone feels clearly wrong to you. Either way, tell us what you saw when you book, so we can compare it with the sensor reading.

Will T8 clear on its own?

Dismissing the pop-up clears it for about 3 hours. If the cause is still there after that, the message returns, which is the cue that the sensor needs testing.

Book a visit

Still seeing T8?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320