Error code · Professional Laundry

ASKO Professional Dryer Code E0: Control Unit Problem

High · stop use, call now

Code: E0
Appliance: Professional Laundry
Brand: ASKO
Warranty: 30-day workmanship

What E0 means

An E0 on an ASKO Professional TDC1773 dryer, such as the TDC1773VF.S or TDC1773VP.S, is read as a control unit problem. The TDC1773 is a commercial-grade dryer sold in the US for multifamily and light commercial laundry rooms, and E0 is the code it shows when the main control reports an internal failure. The dryer stops or refuses to start a cycle, and the display holds the code until the machine is checked.

Common causes of E0

The main control board itself
A loose or damaged connector between the control and the user interface
Power supply to the control that drops out under load
Moisture or heat damage near the control

✓ One safe check you can try

1. Turn the dryer off and let it sit for a few minutes. 2. Make sure the door is fully closed and the lint screen is clean. 3. Start one new cycle and watch whether E0 returns. 4. If E0 comes back, stop using the dryer. Do not open the cabinet or the control panel yourself.

! Why to stop there

Whether the control board is the problem or a wiring connection feeding it is
Whether the code appears at power-up or only after the dryer has been running
Which control board your TDC1773 uses, so we confirm the part before we quote

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Professional Laundry codes

E6ASKO Professional Dryer Code E6: Relay Problem on the Control Board E7ASKO Professional Dryer Code E7: Door Circuit Problem E8ASKO Professional Dryer Code E8: Stuck or Unresponsive Button E9ASKO Professional Dryer Code E9: Boards Out of Step on Software Version WATER INLET FAULTASKO Professional Washer Message "Water Inlet Fault": Supply Problem DRAINING FAULTASKO Professional Washer Message "Draining Fault": Water Not Leaving the Drum E1ASKO Professional Dryer Code E1: Temperature Reading Out of Range E2ASKO Professional Dryer Code E2: Control and Display Not Talking

E0E0 questions

What does E0 mean on a TDC1773 dryer?

It points to the main control unit. The dryer's electronics are reporting a problem inside the control, so the machine will not run a normal cycle until the cause is found.

Will lint or a dirty vent cause E0?

Not directly. A clogged vent causes overheating and drying trouble, which show other codes. E0 is about the control, so cleaning the lint screen is worth doing but rarely clears it.

How do I book a repair for the laundry room?

Call us or fill out the online form to schedule service. We confirm a three-hour arrival window and give a written price before any work.

Book a visit

Still seeing E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320