One drum does both jobs in a combo unit, so it carries parts for washing and for drying: a pump and bearings for the wash, and a heater and fan for the drying. When one side fails, the other may be fine, and that is what you weigh.
Signs That Favor Repair
- Washing works and only drying has stopped, or the other way around.
- The drum turns smoothly with no rumble.
- The door seal is soft and the cabinet is free of rust.
- You have limited space, so a stacked pair would not fit.
Signs That Favor Replacement
- A loud bearing noise along with leaks.
- Several different problems in the same few months.
- Heavy scale or lint buildup in the drying path that keeps returning.
What We Check
We read the model label, test the pump and the drain path, then check the heater, fan and temperature sensors. Drying in a combo unit depends on moving damp air through a condensing path, and lint in that path is a common cause of slow drying. We cannot judge it until we open the machine.
Our Honest Advice
Parts for older combination units can be scarce, and we tell you before ordering anything. If replacement is smarter, we say so, even when that means no repair for us. Work we do is covered by a 30-day workmanship warranty. See our combo repair page.
Think about how you use the machine too. A household that does one or two loads a day puts different wear on it than a family that washes every evening. Tell us how often you use it and what changed when the problem began, and we will factor that into our advice.
To have the combo unit assessed, call us or fill out the online form, and we will confirm a three-hour arrival window.