Error code · Dryer

ASKO T5 Dryer Code E2: Parts Not Talking to Each Other

Medium · inspection needed

Code: E2
Appliance: Dryer
Brand: ASKO
Warranty: 30-day workmanship

What E2 means

E2 on an ASKO T5 series tumble dryer (TD86 platform, for instance the T5HXLG.U), is a communication error. The electronic parts of the dryer, such as the display panel and the main control, constantly pass messages to each other. When those messages stop getting through, the dryer cannot run the program and shows E2. Holding OK while the error is displayed shows a short description.

Common causes of E2

The link between the display panel and the main control
A connector or wire carrying those messages
A temporary interruption that a restart clears

✓ One safe check you can try

1. Turn the dryer off, pause briefly, and turn it on once more. 2. If E2 shows, hold the OK button to read the description. 3. Try a short program and watch for the error to return. 4. If it does, stop using the dryer and arrange a repair visit. Please do not take off any covers.

! Why to stop there

Whether the interruption comes from the display, the main control or the wiring between them
Whether the error follows a particular program or button
The exact part number your dryer takes, which we check before the price is written

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

Protection enabled (screen lock)ASKO T5 Dryer Message "Protection Enabled (Screen Lock)" SENSORASKO T761 and T781 Dryer Message "Sensor" THERMISTORASKO T761, T781 and TD70 Dryer Message "Thermistor" F29ASKO TD70.1 Heat-Pump Dryer Code F29: Evaporator Needs Cleaning F3ASKO T731 Dryer Code F3: Thermistor Problem F30ASKO TD70.1 Dryer Code F30: Cycle Ran Over 200 Minutes F4ASKO T731 Dryer Code F4: Overheat Protection Tripped F5ASKO T731 Dryer Code F5: Moisture Sensor Reading

E2E2 questions

What kind of communication does E2 refer to?

It refers to messages between the electronic parts inside the dryer, such as the display and the main control. One of them is no longer answering correctly.

Can a power reset clear E2?

Sometimes. A restart clears a momentary interruption between the electronic parts. If E2 shows again soon after, the cause is a part or a connection that needs testing, and we find it with a written price first.

Who can repair an E2 for me?

We can. If you want us to handle it, call us or fill out the online form and we confirm a three-hour arrival window with you. You approve the written price first, and the repair is protected by a 30-day workmanship warranty.

Book a visit

Still seeing E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320