ASKO T731 Dryer Code F2: Power Cut or Three-Hour Drying Limit
On the ASKO T731, an older dryer with an LED display, F2 covers two situations in the owner's manual. One is a power outage that interrupted the cycle. The other is the built-in limit of three…
- Code
- F2
- Appliance
- Dryer
- Brand
- ASKO
- Warranty
- 30-day workmanship
What F2 means
On the ASKO T731, an older dryer with an LED display, F2 covers two situations in the owner's manual. One is a power outage that interrupted the cycle. The other is the built-in limit of three hours of drying, after which the dryer stops on its own. Either way the cycle ends early and the display shows F2. Plenty of these older dryers are still running, and we repair them.
Common causes of F2
- A tripped breaker or blown fuse that cut power to the dryer
- A power outage during the cycle
- A cycle that reached the three-hour drying limit with a heavy load or restricted airflow
- A dryer that shows F2 again after cooling down and restarting
1. Check the breaker box and the fuses that feed the dryer. 2. If the dryer ran the full three hours, let it cool down before you restart it. 3. Turn the power off and on again, then start a new cycle with a smaller load. 4. If F2 stays on the display, quit running cycles and book a repair visit.
- Whether power really dropped or the dryer is shutting itself off for another reason
- Whether airflow through the vent is restricted enough to stretch the drying time
- Whether the heat and temperature sensing are working normally
Other Dryer codes
Why does my T731 stop after three hours?
The dryer has a built-in limit of three hours of drying. If a cycle reaches it, the dryer ends the cycle and shows F2. A heavy load or poor airflow can stretch drying that long.
Could F2 just be a power problem?
Yes. A power outage, tripped breaker or blown fuse can end the cycle and bring up F2. Check those first, then restart the dryer after it cools.
Should I repair or replace my T731?
Often a repair makes sense, and we say plainly when it does not. Older dryers can have scarce parts, so we confirm availability first. To arrange a visit, call us or use the online form to get a three-hour arrival window. Expect the price in writing ahead of any work, plus a 30-day workmanship warranty on the repair.
Still unsure about F2?
A technician diagnoses it on site and gives you the price in writing before any work starts.