Booking today · Houston · three-hour arrival windows Independent ASKO specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 804-6320 Request Service
Error code · Dishwasher

ASKO Professional Dishwasher Code F56: Circulation Pump Problem

F56 on the ASKO Professional DWC6432BIXXLSU and DWC6432FIXXLU dishwashers is the circulation pump message. Both are professional-line machines, built for apartment and light commercial use. The circulation pump drives wash water up to the spray arms,…

Medium · inspection needed
Request Service(713) 804-6320
Code
F56
Appliance
Dishwasher
Brand
ASKO
Warranty
30-day workmanship

What F56 means

F56 on the ASKO Professional DWC6432BIXXLSU and DWC6432FIXXLU dishwashers is the circulation pump message. Both are professional-line machines, built for apartment and light commercial use. The circulation pump drives wash water up to the spray arms, and F56 appears when the control sees it stalled or not drawing the current it should. Racks come out dirty, or the wash stops partway through.

Common causes of F56

  • A pump motor that has stopped turning
  • Debris wedged around the pump impeller
  • A loose wire or connector at the pump
  • The control board not driving the pump
✓ One safe check you can try

1. Clear the message by pressing a button. 2. Rinse the coarse and fine filters at the bottom of the tub. 3. Look for a utensil, label or bottle cap that fell to the tub bottom. 4. If F56 comes back, stop using the dishwasher.

! Why to stop there
  • Whether the pump is only jammed or the motor has failed
  • Whether the control is sending power to the pump
  • Which pump part your machine needs, confirmed before we quote
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

F67ASKO Dishwasher Code F67: Water Inlet Warning, Second Type F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem F12ASKO Dishwasher Code F12: Water Inlet Problem, Not Filling in Time F40ASKO Dishwasher Code F40: Inlet Valve Leaking Water Into the Tub F41ASKO Dishwasher Code F41: Heater Circuit Problem F45ASKO Dishwasher Code F45: Diverter Valve Stuck or Not Responding F11ASKO Professional Dishwasher Code F11: Water Stays in the Tub
F56F56 questions
What does F56 point to?

The pump that sends water to the spray arms is not working as the control expects. We test the pump, its wiring and the board in turn to see which one is behind it.

Is it harmful to run the dishwasher with F56 showing?

The dishes will not wash properly, and a stalled motor can overheat. Leave the machine off until it has been checked.

What does the repair come with?

A written price in advance and a 30-day workmanship warranty. To book, call us or use the online form.

Book a visit

Still seeing F56?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320
☎ Call our office ▤ Request Service