Error code · Dishwasher

ASKO Dishwasher Code F67: Water Inlet Warning, Second Type

Medium · inspection needed

Code: F67
Appliance: Dishwasher
Brand: ASKO
Warranty: 30-day workmanship

What F67 means

Seeing F67 on an ASKO DBI564IS.U, DBI564TS.U, DBI564PS.U, DFI or DSD means the fill went wrong in a second way, separate from F12. During filling the control expects the level to climb at a certain pace. When the water does not behave that way, the program ends and F67 appears. The tub is often empty or only partly full.

Common causes of F67

A supply valve that is not fully open
A partly clogged inlet valve screen
Weak water pressure at the connection
A level sensor that misses the incoming water

✓ One safe check you can try

1. Clear the message with any button. 2. Check that the water supply valve is open as far as it goes. 3. Rinse both filters and start a program. 4. If you see F67 again, close the supply valve and leave the dishwasher idle.

! Why to stop there

Whether water really arrives or the sensor does not notice it
Whether the inlet valve opens as far as it should
Whether the pressure from your plumbing is steady

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem D5434 display messages: Overfilling / Water outlet fault / Water inlet fault / Inlet valve leakageASKO D5434 Dishwasher Display Messages: Overfill, Outlet, Inlet and Valve Leakage F10ASKO Dishwasher Code F10: Too Much Water in the Tub F11ASKO Dishwasher Code F11: Drain Pump Not Emptying the Tub F12ASKO Dishwasher Code F12: Water Inlet Problem, Not Filling in Time F40ASKO Dishwasher Code F40: Inlet Valve Leaking Water Into the Tub F41ASKO Dishwasher Code F41: Heater Circuit Problem

F67F67 questions

Why does my dishwasher have two inlet messages?

The control watches for two different fill problems, and each has its own code. We test the full fill path to see which one is in play.

Will opening the valve fix it?

Sometimes. If the valve was only partly open, a full opening and a rinse of the filters may be enough. If not, the valve or the sensor needs testing.

Do you serve homes and apartments?

Yes. The price is written down before any work begins.

Book a visit

Still seeing F67?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320