Error code · Dishwasher

ASKO Dishwasher Code F10: Too Much Water in the Tub

F10 on an ASKO DBI564IS.U, DBI564TS.U or DBI564PS.U, and on the DFI and DSD models with the F-code display, is the Overfilling Water 1 message. The control saw more water in the tub than a normal…

High · stop use, call now

(713) 804-6320

Code: F10
Appliance: Dishwasher
Brand: ASKO
Warranty: 30-day workmanship

What F10 means

F10 on an ASKO DBI564IS.U, DBI564TS.U or DBI564PS.U, and on the DFI and DSD models with the F-code display, is the Overfilling Water 1 message. The control saw more water in the tub than a normal fill should deliver, so it stopped the program and printed F10. Because water may still be entering, we treat this one as a leak risk until the cause is known.

Common causes of F10

An inlet valve that lets water in when it should be closed
A water level sensor that misreads the level
Water pressure pushing past the valve
The control not shutting the fill circuit

✓ One safe check you can try

1. Press any button to clear the message. 2. If water is on the floor or the tub looks too full, turn off the water supply valve under the sink. 3. Wipe up any water and keep the machine off until it has been checked. 4. Do not run another program if F10 comes back.

! Why to stop there

Whether the inlet valve is passing water or the level sensor is wrong
Whether any water reached the base of the dishwasher
Whether the supply pressure is within what the machine allows

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem F67ASKO Dishwasher Code F67: Water Inlet Warning, Second Type F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control F54ASKO Professional Dishwasher Code F54: Overfilling Water 2 F56ASKO Professional Dishwasher Code F56: Circulation Pump Problem F67ASKO Professional Dishwasher Code F67: Water Inlet Problem 2 F68ASKO Professional Dishwasher Code F68: Drain Pump Stalled or Silent D3530 display texts: Overfilling / Water Inlet Fault / Inlet Valve Leakage / Drainage / Blocked FilterASKO D3530 Dishwasher Display Texts: Overfilling, Water Inlet, Valve Leakage and Drainage

F10F10 questions

What does F10 mean on my ASKO dishwasher?

It is Overfilling Water 1. The dishwasher detected too much water and stopped. We check the inlet valve first, then the level sensor.

Is it safe to leave the dishwasher plugged in?

Turn the water supply off first if there is any sign of water outside the tub. Once the supply is off and the floor is dry, the machine can stay as it is until we inspect it.

How do I schedule service?

Call us or use the online form to book. You get a written price before work and a 30-day workmanship warranty afterward.

Book a visit

Still seeing F10?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320