Error code · Dishwasher

ASKO Professional Dishwasher Code F54: Overfilling Water 2

High · stop use, call now

Code: F54
Appliance: Dishwasher
Brand: ASKO
Warranty: 30-day workmanship

What F54 means

Like F10, the F54 message on an ASKO Professional DWC6432 dishwasher means too much water entered the tub, but it is a second, separate overfill warning. The DWC6432BIXXLSU and DWC6432FIXXLU are professional machines sold in the US for multifamily and light commercial use. Supply pressure is part of this one: the owner's manual calls for 4.2 to 140 psi. The control stops the fill and shows F54, and water on the floor is possible.

Common causes of F54

Water pressure outside the range the machine allows
An inlet valve that does not close all the way
A level sensor that misreports the water in the tub
The control failing to end the fill

✓ One safe check you can try

1. Press any button to clear the message. 2. If the tub looks overfull or water is on the floor, turn off the supply valve. 3. Ask your building maintenance team whether the water pressure was changed recently. 4. If F54 returns, keep the water off and stop using the dishwasher.

! Why to stop there

Whether building pressure sits inside the 4.2 to 140 psi range
Whether the valve or the level sensor is the real source
Whether any water reached the base of the machine

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F67ASKO Dishwasher Code F67: Water Inlet Warning, Second Type F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem D5434 display messages: Overfilling / Water outlet fault / Water inlet fault / Inlet valve leakageASKO D5434 Dishwasher Display Messages: Overfill, Outlet, Inlet and Valve Leakage F10ASKO Dishwasher Code F10: Too Much Water in the Tub F11ASKO Dishwasher Code F11: Drain Pump Not Emptying the Tub F12ASKO Dishwasher Code F12: Water Inlet Problem, Not Filling in Time F40ASKO Dishwasher Code F40: Inlet Valve Leaking Water Into the Tub

F54F54 questions

How do F10 and F54 differ?

F10 is the first overfill message and F54 is the second. The second can be tied to supply pressure, so we test the valve and the pressure side by side to tell them apart.

Why does water pressure matter?

Too much pressure can push water past a valve that is working, and too little can confuse the fill timing. The owner's manual gives 4.2 to 140 psi as the working range.

Who do I contact in a managed building?

Call us or use the online form. Property managers can book on behalf of a unit, and a written price comes before we start.

Book a visit

Still seeing F54?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320