Error code · Dishwasher

ASKO Professional Dishwasher Code F67: Water Inlet Problem 2

Medium · inspection needed

Code: F67
Appliance: Dishwasher
Brand: ASKO
Warranty: 30-day workmanship

What F67 means

F67 is the second of two water inlet messages on an ASKO Professional DWC6432BIXXLSU or DWC6432FIXXLU dishwasher, sold in the US for multifamily and light commercial use. F12 is the first. While the tub fills, the control watches the level rise, and F67 means the water did not come in the way it expected. The program stops and the display holds the code, usually with an empty or half-filled tub.

Common causes of F67

A supply valve that is shut or only partly open
An inlet valve or its screen that is restricted
Low pressure at the dishwasher connection
A level sensor that does not register the incoming water

✓ One safe check you can try

1. Clear the message with any button. 2. Confirm the water supply valve is fully open. 3. Clean both filters in the tub, then run a program. 4. If F67 returns, close the supply valve and stop using the dishwasher.

! Why to stop there

Whether water truly arrives or the sensor fails to notice it
Whether the inlet valve opens all the way
Whether the building delivers enough pressure

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F67ASKO Dishwasher Code F67: Water Inlet Warning, Second Type F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem F41ASKO Professional Dishwasher Code F41: Heating Circuit Problem F52ASKO Professional Dishwasher Code F52: Sensor Reads the Water Level Wrong F54ASKO Professional Dishwasher Code F54: Overfilling Water 2 F56ASKO Professional Dishwasher Code F56: Circulation Pump Problem F68ASKO Professional Dishwasher Code F68: Drain Pump Stalled or Silent

F67F67 questions

Why have two inlet messages, F12 and F67?

The control tracks two separate fill conditions. We test the whole fill path, from the supply valve to the level sensor, to find out which one tripped.

The supply valve is open. What else could it be?

A clogged valve screen, a weak valve, low pressure or a sensor that misreads the fill. We test them in that order.

Is a property manager allowed to request service?

Yes. Call us or use the online form to book, and the price is quoted in writing before we start.

Book a visit

Still seeing F67?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320