Error code · Washer

ASKO W5 Series Washer Code E0: Incorrect Settings

The display of a W5114RXLW or any other W5 series washer shows an error message with the code E0 when the washer receives a combination of settings it cannot carry out. The program does not start…

Low risk · DIY check OK

(713) 804-6320

Code: E0
Appliance: Washer
Brand: ASKO
Warranty: 30-day workmanship

What E0 means

The display of a W5114RXLW or any other W5 series washer shows an error message with the code E0 when the washer receives a combination of settings it cannot carry out. The program does not start or stops, and the machine waits for you to act. This points to a setting or program choice, not to a damaged part, although a control problem can produce the same message if it keeps returning.

Common causes of E0

Program, temperature and spin choices that do not go together
A selection made while the program was already underway
Control electronics, only if the message keeps coming back

✓ One safe check you can try

1. Turn the program selector to the setting you want and choose it again from the start. 2. Pick one program and the options that belong with it, without changing them mid-cycle. 3. Restart the program. 4. If the error appears again, schedule service, since the owner's manual sends you to a technician at that point.

! Why to stop there

If E0 returns with ordinary settings, the cause is no longer your selection and we look at the control
We test whether the buttons and selector send clean signals before we point to any part
Any repair starts with a written price from us, and we warrant our workmanship for 30 days

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

FOAMINGASKO Washer Message "FOAMING": Too Much Suds OVERFLOWASKO Washer Message "OVERFLOW": Water Level Too High PRESSURE SENSOR FAULTASKO Washer Message "PRESSURE SENSOR FAULT": Water Level Sensor Problem TEMPERATURE STOP FAULTASKO Washer Message "TEMPERATURE STOP FAULT": Temperature Control Problem THERMISTOR FAULTASKO Washer Message "THERMISTOR FAULT": Water Temperature Sensor Problem Warning - Drum cleaningASKO W5 Washer Message "Warning - Drum Cleaning": Cleaning Reminder WASH MOTOR FAULTASKO Washer Message "WASH MOTOR FAULT": Drum Motor Problem WATER INLET FAULTASKO Washer Message "WATER INLET FAULT": No Water Coming In

E0E0 questions

How does an ASKO W5 washer treat code E0?

It means incorrect settings. The washer was given a combination it cannot run, so it stops and shows the code until you restart the program.

Will E0 clear by itself?

Usually restarting the program with a simpler selection clears it. If the same code comes back with normal settings, something besides your choices is involved and the washer needs a look.

Is E0 dangerous for the washer?

No. It is the machine refusing a setting, not a warning about water or heat. Still, a code that keeps returning is worth a visit so a small control problem does not grow.

Book a visit

Still unsure about E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320