Error code · Washer

ASKO Washer Message “TEMPERATURE STOP FAULT”: Temperature Control Problem

Medium · inspection needed

Code: TEMPERATURE STOP FAULT
Appliance: Washer
Brand: ASKO
Warranty: 30-day workmanship

What TEMPERATURE STOP FAULT means

Older ASKO W6641 and W6661 models show a temperature stop message on the LCD when the washer cannot hold or control the water temperature as the program requires. The program stops instead of washing at the wrong temperature. Turning the power off or changing the program clears the message, though it returns if the cause remains.

Common causes of TEMPERATURE STOP FAULT

Temperature thermostat or safety stop in the heating circuit
Heating element
Temperature sensor and its wiring
Control that switches the heater

✓ One safe check you can try

1. Turn the power off to clear the message. 2. Pick a cooler program and start it to see whether the washer finishes. 3. If the message returns, schedule service, since the owner's manual sends you to a service technician.

! Why to stop there

A cooler program may finish while the heating circuit still has a problem, so we test the heater and its controls
We check the temperature stop and the sensor separately before we replace either
We confirm parts for these older washers before the repair, and the written price comes first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

E7.2ASKO W5 Washer Shows E7.2: Too Much Detergent E9 / E9.1ASKO W5 Washer Code E9 or E9.1: Water Leak Detected F10ASKO W6 Washer Error F10: Overfilling F11ASKO W6 Washer Code F11: Drainage Error F12ASKO W6 Washer F12: Water Inlet Error FOAMINGASKO Washer Message "FOAMING": Too Much Suds OVERFLOWASKO Washer Message "OVERFLOW": Water Level Too High PRESSURE SENSOR FAULTASKO Washer Message "PRESSURE SENSOR FAULT": Water Level Sensor Problem

TEMPERATURE STOP FAULTTEMPERATURE STOP FAULT questions

What does the temperature stop message mean on my ASKO washer?

The washer could not control the water temperature, so it stopped the program. The cause is in the heating or temperature control circuit.

Can I keep washing on a cooler program?

A cooler program may work for a while, but the circuit that could not control the temperature still needs a test. We would rather check it before it affects other programs.

Do you service older ASKO washers like the W6661?

Yes. They are older models that many homes still use. We confirm parts first, give a written price, and cover our work with a 30-day warranty.

Book a visit

Still seeing TEMPERATURE STOP FAULT?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320