Error code · Dishwasher

ASKO Dishwasher Code F40: Inlet Valve Leaking Water Into the Tub

High · stop use, call now

Code: F40
Appliance: Dishwasher
Brand: ASKO
Warranty: 30-day workmanship

What F40 means

F40 is the inlet valve leakage message on ASKO dishwashers with the F-code display, including the DBI564IS.U, DBI564TS.U and DBI564PS.U and the DFI and DSD models. It means the control sensed water arriving while the inlet valve was supposed to be shut. Because more water could follow, the program is stopped. The owner's manual tells you to turn off the water supply valve and contact customer care.

Common causes of F40

An inlet valve that no longer seals when it is closed
Scale or grit holding the valve open a crack
Supply pressure higher than the valve can hold back
The control leaving the valve circuit energized

✓ One safe check you can try

1. Shut the water supply valve to the dishwasher first. 2. Dismiss the message with any button. 3. Check the floor and the cabinet under the dishwasher for water. 4. Keep the supply closed and the machine idle until it has been inspected.

! Why to stop there

Whether the valve itself leaks or the control keeps it energized
Whether water has already collected under the machine
Whether your home's pressure is adding to the problem

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F67ASKO Dishwasher Code F67: Water Inlet Warning, Second Type F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem F56ASKO Professional Dishwasher Code F56: Circulation Pump Problem F67ASKO Professional Dishwasher Code F67: Water Inlet Problem 2 F68ASKO Professional Dishwasher Code F68: Drain Pump Stalled or Silent D3530 display texts: Overfilling / Water Inlet Fault / Inlet Valve Leakage / Drainage / Blocked FilterASKO D3530 Dishwasher Display Texts: Overfilling, Water Inlet, Valve Leakage and Drainage D5434 display messages: Overfilling / Water outlet fault / Water inlet fault / Inlet valve leakageASKO D5434 Dishwasher Display Messages: Overfill, Outlet, Inlet and Valve Leakage

F40F40 questions

What happens if I ignore F40?

Water that keeps passing the valve can fill the tub and then the base of the dishwasher, so the real risk is a leak onto your floor. Closing the supply valve is the simplest protection.

Do I have to replace the whole dishwasher?

Usually not. The inlet valve is a replaceable part. We confirm the part and give you a written price before any work, and we tell you plainly if an older machine is not worth repairing.

How soon should I act?

Close the supply valve today, then ask for a visit by calling us or sending the online form.

Book a visit

Still seeing F40?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320