Error code · Washer

ASKO W6641 and W6661 Washer Code 0000: Spin Did Not Start

On ASKO W6641 and W6661 washers with the LCD text display, an older platform, 0000 flashes at the top right of the screen when the machine has failed to spin. The most likely reason is a…

Low risk · DIY check OK

(713) 804-6320

Code: 0000
Appliance: Washer
Brand: ASKO
Warranty: 30-day workmanship

What 0000 means

On ASKO W6641 and W6661 washers with the LCD text display, an older platform, 0000 flashes at the top right of the screen when the machine has failed to spin. The most likely reason is a load that is out of balance. The wash stops short of the spin and the display shows 0000. The message clears when you turn the power off or change the program, and we repair these older washers.

Common causes of 0000

A load out of balance, such as a few heavy items bunched on one side
A single heavy item, like a rug or towel, that soaks up water
Whether the washer spins normally once the load is evened out

✓ One safe check you can try

1. Turn the power off and on again. 2. Open the door and spread the wet laundry evenly around the drum. 3. Close the door and run the Spin program again. 4. If 0000 returns with a balanced load, schedule service.

! Why to stop there

Whether the drum and motor spin up properly with a balanced load
Whether the balance sensing reads correctly
Whether the drain empties completely before the spin

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

WATER INLET FAULTASKO Washer Message "WATER INLET FAULT": No Water Coming In WATER OUTLET FAULTASKO Washer Message "WATER OUTLET FAULT": Drain Problem E7.2ASKO W5 Washer Shows E7.2: Too Much Detergent E9 / E9.1ASKO W5 Washer Code E9 or E9.1: Water Leak Detected F10ASKO W6 Washer Error F10: Overfilling F11ASKO W6 Washer Code F11: Drainage Error F12ASKO W6 Washer F12: Water Inlet Error FOAMINGASKO Washer Message "FOAMING": Too Much Suds

00000000 questions

What does 0000 mean on my ASKO washer?

It means the washer did not complete the spin. An unbalanced load is the likely cause, and redistributing the laundry in the drum usually settles it before the next try.

How do I clear 0000?

Turn the power off, or change the program. Then open the door, even out the laundry in the drum, and run the Spin program again.

What if it keeps showing 0000?

Then the drive or the balance sensing needs testing. We tell you if an older washer is past saving. Reach out by calling us or using the online form to schedule service. The written price comes first, then the repair, then a 30-day workmanship warranty.

Book a visit

Still unsure about 0000?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320