Booking today · Houston · three-hour arrival windows Independent ASKO specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 804-6320 Request Service
Error code · Washer

ASKO Washer E36 on W5 Series: Display and Control Not Talking

Inside an ASKO W5 series washer such as the W5114RXLW, code E36 means the two electronic units inside the washer have stopped talking to each other. One is the user interface behind the display and buttons,…

Medium · inspection needed
Request Service(713) 804-6320
Code
E36
Appliance
Washer
Brand
ASKO
Warranty
30-day workmanship

What E36 means

Inside an ASKO W5 series washer such as the W5114RXLW, code E36 means the two electronic units inside the washer have stopped talking to each other. One is the user interface behind the display and buttons, and the other is the main control unit that drives the motor, valves and pump. The washer may freeze, ignore the buttons, or stop the program with the code on the screen.

Common causes of E36

  • Loose or damaged cable between the display unit and the main control
  • Display unit or main control unit that has lost its signal
  • Power interruption during startup that left the units out of step
✓ One safe check you can try

1. Switch the washer off at the control, pause briefly, and switch it back on. 2. Start a short program and watch whether E36 returns. 3. If it does, leave the washer idle and schedule service; the owner's manual lists a technician call for this code.

! Why to stop there
  • The code does not say whether the display unit, the main control or the link between them is to blame
  • We test the cable connection and the signal first, so you are not billed for a part you do not need
  • We send a written price before any board is ordered, and our work carries a 30-day workmanship warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

WATER OUTLET FAULTASKO Washer Message "WATER OUTLET FAULT": Drain Problem E7.2ASKO W5 Washer Shows E7.2: Too Much Detergent E9 / E9.1ASKO W5 Washer Code E9 or E9.1: Water Leak Detected F10ASKO W6 Washer Error F10: Overfilling F11ASKO W6 Washer Code F11: Drainage Error F12ASKO W6 Washer F12: Water Inlet Error FOAMINGASKO Washer Message "FOAMING": Too Much Suds OVERFLOWASKO Washer Message "OVERFLOW": Water Level Too High
E36E36 questions
What does E36 on my ASKO washer tell me?

The display unit and the main control unit lost contact with each other. A program needs both, so the washer halts and keeps the code on screen.

Will turning it off and on fix E36?

Sometimes. A brief power interruption can leave the units out of step, and a restart puts them back in sync. If E36 returns, the problem is in the units or the link between them.

Is E36 caused by a power surge?

A surge can upset the electronics, but the code alone does not prove it. We test the control units and the connection to find out what changed.

Book a visit

Still seeing E36?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320
☎ Call our office ▤ Request Service