1500
ASKO 1500 Dishwasher Pump Repair
Most common issues on this model
- Pump that keeps humming without clearing the sump
- Panel response, starting with power and the door switch
- Drying results when the load is damper than before
- Lingering water at the bottom of the tub
The ASKO 1500 is an older ASKO dishwasher no longer sold, and it appears in ASKO’s older lineup next to the 1400. We keep the two apart in our work because a shared family does not always mean shared parts.
On a 1500 the first thing we look at is the drain: a pump that keeps humming but never empties the sump is a classic sign of a blockage or a worn impeller. Standing water in the base and loads that come out wetter at the end tend to follow from the same cause, so we clear and test the drain before we look at anything else.
If the display is blank or the buttons are unresponsive, we check power and the door switch before the control. We read the model and serial number from the label, confirm older parts before the repair and give you the price in writing. The work carries a 30-day warranty.
Key features
- ASKO dishwasher
- Model number 1500
- Older model, no longer sold
- Grouped with the 1400 in ASKO's older lineup
Error codes this model can show
Why does my 1500 hum but not drain?
A blockage or a worn pump impeller is the usual reason a pump hums without draining. We open the sump, clear it and test the pump under load so you know the water now leaves the tub.
Is the 1500 the same as the 1400?
They are grouped together in ASKO's older lineup, but we do not assume matching parts. We read your label and confirm each part before ordering.
Why are my dishes wetter than they used to be?
Water that does not fully drain re-wets the load during drying, so a damp finish often traces back to the sump. We check the drain path first, then the heat and the vent.
Book repair for your 1500
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.