Error code · Dishwasher

ASKO Professional Dishwasher Code F11: Water Stays in the Tub

Medium · inspection needed

Code: F11
Appliance: Dishwasher
Brand: ASKO
Warranty: 30-day workmanship

What F11 means

On an ASKO Professional DWC6432 dishwasher, including the DWC6432BIXXLSU and DWC6432FIXXLU, F11 is the water outlet message. The machine ran its pump, but the water did not leave the tub the way the control expected. The DWC6432 is the professional line, sold for commercial and multifamily use. You may find dirty water standing in the bottom after a cycle, or the program may stop early with F11 showing.

Common causes of F11

Food or debris stuck in the drain pump
A drain hose that is kinked or crushed
A clogged filter or sump
A drain pump motor that no longer turns

✓ One safe check you can try

1. Clear the message by pressing any button. 2. Check that the drain hose has no kink behind or under the machine. 3. Unblock the drain pump as the owner's manual describes. 4. Run a program again. If F11 returns, stop using the dishwasher.

! Why to stop there

Whether the pump is only clogged or has stopped working
Whether the drain connection or air gap is plugged downstream
Whether the control is reading the pump correctly

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F67ASKO Dishwasher Code F67: Water Inlet Warning, Second Type F68ASKO Dishwasher Code F68: Brushless Drain Pump Not Responding to the Control Flashing LightsASKO D3251 Dishwasher Flashing Lights: Five Programs That Signal a Problem D5434 display messages: Overfilling / Water outlet fault / Water inlet fault / Inlet valve leakageASKO D5434 Dishwasher Display Messages: Overfill, Outlet, Inlet and Valve Leakage F10ASKO Dishwasher Code F10: Too Much Water in the Tub F11ASKO Dishwasher Code F11: Drain Pump Not Emptying the Tub F12ASKO Dishwasher Code F12: Water Inlet Problem, Not Filling in Time F40ASKO Dishwasher Code F40: Inlet Valve Leaking Water Into the Tub

F11F11 questions

What is F11 on my ASKO Professional dishwasher?

It is the water outlet message. The tub is not emptying properly, so the pump and the drain path are where we start.

Is the standing water a health problem?

Dirty water sitting in a dishwasher is not something you want to use. Do not run another load until it drains. We check the pump and the line to find out why it holds water.

How soon can I book a visit?

Call us or use the online form, and we will confirm a three-hour arrival window. Our written price comes before work, and repairs carry a 30-day workmanship warranty.

Book a visit

Still seeing F11?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320