Error code · Washer

ASKO Washer Message “WASH MOTOR FAULT”: Drum Motor Problem

Your older ASKO W6641 or W6661 prints a wash motor message on the LCD when the motor that turns the drum does not respond as the program asks. The drum may not turn, may stall, or…

Medium · inspection needed

(713) 804-6320

Code: WASH MOTOR FAULT
Appliance: Washer
Brand: ASKO
Warranty: 30-day workmanship

What WASH MOTOR FAULT means

Your older ASKO W6641 or W6661 prints a wash motor message on the LCD when the motor that turns the drum does not respond as the program asks. The drum may not turn, may stall, or may turn unevenly. The washer stops with water and wet laundry inside. Power off or a new program clears the message, but it returns if the motor circuit is still not right.

Common causes of WASH MOTOR FAULT

Motor or its brushes and winding
Wiring and connector at the motor
Motor control circuit
Drum that does not turn freely, or a load that is too heavy

✓ One safe check you can try

1. Turn the power off to clear the message. 2. Open the door once the washer has stopped and check that the clothes are not packed in or twisted together. 3. Restart a program. 4. If the message returns, schedule service, as the owner's manual recommends a service technician.

! Why to stop there

One good restart proves little, so the motor and its control are tested separately
We turn the drum by hand to see whether something other than the motor is holding it
Because the washer is older, we confirm the motor is available first and say plainly if the repair is not worth it

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

E7.2ASKO W5 Washer Shows E7.2: Too Much Detergent E9 / E9.1ASKO W5 Washer Code E9 or E9.1: Water Leak Detected F10ASKO W6 Washer Error F10: Overfilling F11ASKO W6 Washer Code F11: Drainage Error F12ASKO W6 Washer F12: Water Inlet Error FOAMINGASKO Washer Message "FOAMING": Too Much Suds OVERFLOWASKO Washer Message "OVERFLOW": Water Level Too High PRESSURE SENSOR FAULTASKO Washer Message "PRESSURE SENSOR FAULT": Water Level Sensor Problem

WASH MOTOR FAULTWASH MOTOR FAULT questions

What does the wash motor message mean on my ASKO washer?

The motor that turns the drum did not respond as the program required. The washer stops to protect the motor and prevent damage.

Could a heavy load cause it?

A packed load can strain the motor, so remove some items and try again. If the message comes back with a small load, the motor and its control are what we test next.

Is it worth repairing an older W6641 or W6661 motor?

Often yes, if the motor is available. We confirm the part first, give a written price before work, and say plainly when another repair would cost more than it is worth.

Book a visit

Still seeing WASH MOTOR FAULT?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 804-6320