ASKO Washer Code E26 on W5 Series: Lock Current Too High
On an ASKO W5 series washer like the W5114RXLW, E26 means the washer had an error while locking the door because the lock drew more current than allowed. The control shuts the attempt down to protect…
- Code
- E26
- Appliance
- Washer
- Brand
- ASKO
- Warranty
- 30-day workmanship
What E26 means
On an ASKO W5 series washer like the W5114RXLW, E26 means the washer had an error while locking the door because the lock drew more current than allowed. The control shuts the attempt down to protect itself. The door may close but not lock, and the program will not start.
Common causes of E26
- Door lock mechanism that binds or draws extra current
- Door catch that is stiff or out of line
- Wiring or connector at the lock
- Control circuit that drives the lock
1. Switch the washer off, wait a moment, and switch it on again. 2. Close the door gently and restart the program. 3. If E26 appears again, stop using the washer and schedule service, because the owner's manual says to call the service center.
- Extra current at the lock can come from the lock or from wiring, and we test both
- We check whether the catch moves freely before we decide the lock is bad
- We confirm the parts, state the price in writing, and warrant our workmanship for 30 days
Other Washer codes
What is E26 telling me about my ASKO washer?
It is an error while locking the door that exceeded the locking current. The lock pulled more current than the washer allows, so the control stopped the attempt.
How is E26 different from E22?
E22 means the door would not lock. E26 names the reason: the current at the lock went too high. Both are checked at the same lock.
Can I use the washer after a restart?
If the restart clears E26 and loads finish normally, you can use it. If the code returns, the lock is working too hard and should be checked.
Still seeing E26?
A technician diagnoses it on site and gives you the price in writing before any work starts.